Oceanic Data Mask, Operating Manual

Page: 46 / 148

46
SET NOR SAFETY STOP, information includes (Fig. 34):
> Graphics SAFE and StOP
> Safety Stop Depth Set Point and FT (or M) icon
> STOP Bar icon
> Safety Stop Time Set Point (min:sec), flashing.
 Pressing and releasing the S (Side) button momentarily (< 2
seconds each) will step through the Stop Time Set Points of
OFF, 3:00, and 5:00 (min:sec).
 Pressing and releasing the A (Top) button momentarily (< 2
seconds) will save the Time setting and the Depth Set Point
will flash, or if Stop Time is set OFF advance to the SET
CONSERVATIVE FACTOR screen with the Set Point flashing.
 Pressing and releasing the S (Side) button momentarily and
repeatedly (< 2 seconds each time) will step through the
Stop Depth Set Points of 10, 15, and 20 FT (or 3, 4, 5,
and 6 M).
 Pressing and releasing the A (Top) button momentarily (< 2
seconds) will save the settings and/or advance to the SET
CONSERVATIVE FACTOR screen with the Set Point flashing.
 Pressing the A (Top) button repeatedly (< 2 seconds) will
step through the other SET U screens.
 Depressing the A (Top) button for 2 seconds will save the
settings and revert to the SET U screen.
 If no button is pressed for a period of 2 minutes, operation
will revert to the NOR (or GAU) SURF MAIN screen.
Fig. 34 - SET NO DECO
SAFETY STOP
There is no penalty
if you surface before
a No Deco Safety
Stop is completed.