99
SURF Displays during the Transition Period -
To access SURF ALT 1, press and release the A (Top) button (< 2 seconds) while
viewing the SURF MAIN.
Press and release the A (Top) button (< 2 seconds) while viewing SURF ALT 1 display
to access SURF ALT 2.
> The ALT screens will revert to SURF MAIN after 5 seconds unless the A (Top) button is
pressed.
Press the S (Side) button to toggle the Backlight.
To set the Backlight, access Set G (GLO) by pressing the S (Side) button for 2 seconds
while viewing the SURF MAIN.
To access the LOG Preview screen for that dive, press and release the A (Top) button
3 times (< 2 seconds each time) while viewing the SURF MAIN.
Press/release the S (Side) button to view the LOG 1 screen.
Press/release the S (Side) button again to view the LOG 2 screen.
Press/release the S (Side) button again to view the LOG 3 screen, if a Nitrox dive.
Press/release the S (Side) button again to return to the SURF MAIN screen.
The screen will revert to NOR SURF MAIN after 2 minutes if no button is pressed.
Data for that dive will not be stored in the DataMask's Log or Download memory until the
10 minute Transition Period on the surface is completed.
Once 10 minutes have elapsed, the Surface Interval time display colon will stop flashing
indicating that the Dive and Transition Period are completed, and a subsequent descent
will be considered a new dive.
Summary of Contents for Data Mask
Page 1: ...Mask Dive Computer Operating Manual TM ...
Page 78: ...78 This page intentionally left blank ...
Page 96: ...96 This page intentionally left blank ...
Page 148: ......
