Oceanic Data 100, Owner'S Manual

Page: 81 / 92

DATA100
71
Power:
• Batteries Two 3 volt lithium cells, CR2032 or equivalent
• Life expectancy 50 - 24 hour periods of activation (approximate)
(variable number of dives)
• Shelf life See battery manufacturer's specs. (2 to 5 yrs.)
• Low Battery condition Replace both prior to diving.
Activation:
• Manual activation is required (water immersion does not activate unit).
• Cannot be activated deeper than 4 feet (1.5 meters)
• Cannot be activated at elevations higher than 14,000 feet (4,267 meters)
• Needed before the first dive.
• Automatically shuts off if no dive is made within 120 minutes after initial
activation.
• Cannot be shut off manually (only if the batteries are removed).
(Nitrogen calculation for repetitive dives would be lost).
External Access Mode:
• Not needed by the user, used by the factory for diagnostics / calibration.
• Mode is activated during the Surface or PDPS Mode when the activation
button is held in for more than 8 seconds.
• Activation when a Low Battery condition is initially indicated will cause
the flashing Low Battery icon to disappear implying satisfactory voltage.
(Batteries must be replaced prior to diving if Low Battery is displayed.)
• The letters 'EA' appear as the lower left display and a countdown appears
as the lower right display. After counting down from 6 to 0, the Data100
reverts back to the Surface or PDPS Mode.
Special Displays: Occurrence
• Diagnostic Display Activation
• Out of Range 330+ feet (99.5+ meters)
• Gauge Mode Countdown Timer 12 - 24 hours after violation
• External Calibration Access (EA) If activation button is held for 8
sec during Surface or PDPS mode.
OPERATIONAL PERFORMANCE
Function:
Accuracy:
• Depth
±
1% of full scale
• Timers 1 second per day
Dive Counter:
• Displays Dives #1 - #9 then recycles to #1 (and continues #1 - #9)
• Resets to Dive #1, upon diving (after a 12 hour surface time)
• Cycles to next Dive # at 5 feet (1.5 meters) depth after a 10 minute surface
interval
Dive Log Mode:
• Stores latest (most recent) 12 dives in memory for viewing
• After 12 dives, adds latest dive to memory, deletes oldest dive
Altitude:
• Altitude range 0 - 14,000 feet (4,267 meters) above sea level
• Modes Full computer functions up to 14,000 feet (4,267 meters)
• Activation not possible higher than 14,000 feet (4,267 meters).
• Recalibration of depth readings from 'feet of sea water' to 'feet of fresh water'
higher than 2,000 feet (610 meters) elevation.
SPECIFICATIONS (cont'd)