Oceanic Data 100, Owner'S Manual

Page: 63 / 92

DATA100
53
LOW BATTERY CONDITION
You will be alerted to a Low Battery condition by a flashing Battery icon located
above the dive mode icon near the top left of the display (Fig. 48). The Data100
will only activate if there is enough battery power to complete one full day of
diving. Also consider that remaining battery life can be suddenly shortened by a
change in ambient temperature.
Oceanic strongly advises that you replace all of the batteries and DO
NOT attempt to dive with the Data100 when the Battery icon remains
on display, and that you replace the batteries with new prior to any
multi day dive trip that will include a profile of repetitive dives, such
as multiple days on a live aboard vessel.
WARNING: Adjusted No Decompression Limits will be erased
when the batteries are replaced between repetitive dives.
Battery Removal
If the module is in a wrist boot, it will be necessary to peel the lips of the boot
downward off the module while applying pressure from underneath, working it
out slowly. If in a console, bend the rubber console boot back to expose the edge
of the module. If the console boot is flexible enough to permit, you may bend it
GLO
DATA
100
FT
DATA
100
GLO
(Surface Mode)
(Dive Mode)
Fig. 48 - Low Battery