OCEANAIRE PWC Series, Manual

Page: 8 / 32

6
USE OF EXTENSION CORDS
CAUTION
FOR MODELS PWC1211 AND PWC1811
AN EXTENSION CORD CAN BE
USED PROVIDED IT IS RATED AT LEAST 15 AMPS @ 115 VOLTS WITH GROUND-
ING-TYPE ATTACHMENT PLUG AND GROUNDING TYPE
CONNECTOR (LOAD FITTING)
FOR MODELS PWC2412 AND PWC3612
AN EXTENSION CORD CAN BE
USED PROVIDED IT IS RATED AT LEAST 20 AMPS @ 250 VOLTS WITH GROUND-
ING-TYPE ATTACHMENT PLUG AND GROUNDING TYPE CONNECTOR (LOAD
FITTING)
FOR MODEL PWC6012
AN EXTENSION CORD CAN BE USED PROVIDED IT IS
RATED AT LEAST 30 AMPS @ 250 VOLTS WITH GROUNDING-TYPE ATTACH-
MENT PLUG AND GROUNDING TYPE CONNECTOR (LOAD FITTING)
FOR MODEL PWC3632
AN EXTENSION CORD CAN BE USED PROVIDED IT
IS RATED AT LEAST 20 AMPS @ 250 VOLTS, 3 PHASE
FOR MODEL PWC6032
AN EXTENSION CORD CAN BE USED PROVIDED IT
IS RATED AT LEAST 30 AMPS @ 250 VOLTS, 3 PHASE
FOR MODELS PWC3634 AND PWC6034
AN EXTENSION CORD CAN BE
USED PROVIDED IT IS RATED AT LEAST 20 AMPS @ 600 VOLTS, 3 PHASE
SPECIAL NOTICE — THREE PHASE OPERATION
Models PWC3632, PWC3634, PWC6032 and PWC6034
All three-phase models are equipped with a three-phase monitor for added com-
pressor protection. The phase monitor, located in the control box, has multi-
color LED that reports status. The monitor protects the compressor from reverse
operation, phase loss and low voltage situations. Further description of the three
-phase monitor is located in the electrical section of the manual.
NOTICE -
DO NOT BYPASS THE THREE PHASE MONITOR. THIS
WILL VOID THE WARRANTY.