20
PREVENTIVE MAINTENANCE
CLEANING THE UNIT
Wash all coils and filters and allow the unit to dry completely.
BLOWER MOTOR
The evaporator motor on all units have permanently lubricated bearings.
No oiling is Necessary.
FILTER
A clogged filter will cause the unit to operate at greatly reduced
efficiencies. We recommend that the filter be inspected on a regular basis
(every six weeks or less)
depending on the environment. The evaporator
filter is located behind the return air grille and can be easily removed and
cleaned. The filter must be washed periodically as needed by placing it in a
dishwasher or soaking in a solution of warm water and detergent for 10
minutes. Then rinsing clean with hot water and shaking excess moisture
from filter.
GENERAL
Oceanaire products are NOT approved for outdoor use.
Therefore, off-
season storage should be indoor, protected from weather conditions.
When necessary maintenance steps outlined above are followed,
the air conditioner will provide long and reliable service. The
refrigeration and electrical circuits of the system should only be
serviced by a fully qualified service technician.
Summary of Contents for PWC Series
