manualshive.com logo in svg

Oce VL3200x, User Manual, Page: 155 / 227

Share
Download
Oce VL3200x User Manual Download Page 155

Troubleshooting and routine maintenance

143

C

e

Slowly take out the drum unit and toner 
cartridge assembly. The jammed paper 
may be pulled out with the drum unit and 
toner cartridge assembly, or this may 
release the paper so you can pull it out 
of the paper tray opening.

 

IMPORTANT

We recommend that you place the drum 
unit and toner cartridge assembly on a 
clean, flat surface with a sheet of 
disposable paper or cloth underneath it in 
case you accidentally spill or scatter toner.

To prevent damage to the machine from 
static electricity, DO NOT touch the 
electrodes shown in the illustration.

 

 

f

Put the drum unit and toner cartridge 
assembly back in the machine.

 

g

Close the front cover.

h

Put the paper tray firmly back in the 
machine.

i

Plug the machine’s power cord back into 
the electrical socket first, and reconnect 
all cables and telephone line cord. Turn 
on the machine’s power switch.

Summary of Contents for VL3200x




































































































































































































































Reviews:

No comments