manualshive.com logo in svg

Oce VL3200x, User Manual, Page: 160 / 227

Share
Download
Oce VL3200x User Manual Download Page 160

148

Routine maintenance

C

WARNING

 

Use neutral detergents.

 

 

DO NOT use cleaning materials that 
contain ammonia, alcohol, any type of 
spray, or any type of flammable substance 
to clean the outside or inside of the 
machine. Doing this may cause a fire or 
electrical shock. (For more information see 

Important safety instructions

 on page 109.)

 

IMPORTANT

The drum unit contains toner, so handle it 
carefully. If toner scatters on your hands 
or clothes, wipe or wash it off with cold 
water at once.

 

Cleaning the outside of the 
machine

C

a

Turn off the machine’s power switch. 
Unplug the telephone line cord first, 
disconnect all cables, and then unplug 
the power cord from the AC power 
outlet.

b

Pull the paper tray completely out of the 
machine.

 

c

Wipe the outside of the machine with a 
dry, lint-free soft cloth to remove dust.

 

d

Remove anything that is stuck inside the 
paper tray.

e

Wipe the inside and the outside of the 
paper tray with a dry, lint-free soft cloth 
to remove dust.

 

f

Re-load the paper and put the paper tray 
firmly back in the machine.

g

Plug the machine’s power cord back into 
the AC power outlet first, and reconnect 
all cables and telephone line cord. Turn 
on the machine’s power switch.

Summary of Contents for VL3200x




































































































































































































































Reviews:

No comments