Oce VL3200x User Manual Download Page 177

Page: 177 / 227

Menu and features

165

How to access the menu
mode

Press

Menu

Choose an option.

Press

for System Setup menu.

Press

for Fax menu.

Press

for Copy menu.

Press

for Printer menu.

Press

for USB Direct I/F menu.

Press

for Print Reports menu.

Press

for Network menu.

Press

for Machine Info. menu.

Press

for Service menu.

Press

for Initial Setup.

This will appear only when the LCD shows an
error message.

You can also scroll through each menu
level by pressing

for the direction

you want.

Press

when the option you want

appears on the LCD.
The LCD will then show the next menu
level.

Press

to scroll to your next menu

selection.

Press

When you have finished setting an
option, the LCD will show

Accepted

Press

Stop/Exit

to exit Menu mode.

Summary of Contents for VL3200x




































































































































































































































Search results

Summary of Contents for VL3200x

Reviews:

Oce VL3200x, User Manual, Page: 177 / 227

Search results

Summary of Contents for VL3200x

Reviews: