Oce VarioPrint 2062 NC, User Manual

Page: 38 / 180

38 Chapter 6 The End-user Display Screen
Change or restore the default job settings
Change or restore the default job settings
Introduction
The Océ VarioPrint
®
2062/75 NC has a collection of job settings, defined by Océ.
You can change the Océ settings, according to the requirements of your company or
department. The Océ VarioPrint
®
2062/75 NC allows you to recover the Océ defined
settings, at your convenience.
Before you begin
1.
When defining the company or department settings, first define the required job
settings in the available operating modes.
2.
Enter the Key operator system ( see ‘Enter or quit the key operator system’ on
page 28 ).
Illustration
[35]
[35] Save the current job settings
[36]
[36] Restore the default Océ settings
Changing the default job settings
1.
Press the 'Machine' key.
2.
Select the 'Console defaults' tab.
3.
Press the 'Use job settings' key to select 'Current'.
4.
Press the start key to confirm.