Oce TDS400, Quick Reference Manual

Page: 53 / 95

Maintenance and Supplies 53
Cleaning the glass platen and the reference
roller of the scanner
If the glass platen is dirty or static, you must clean the platen to make sure
quality copies are made. Clean the white reference roller at the same time.
Attention:
When you clean the reference roller, be careful not to damage the
sensors on the scanner
▼
How to clean the glass platen and reference roller
1
Turn off the scanner.
2
Push the front side of the cover down and pull it toward you to unlock the top
cover.
[24] Open the top cover of the scanner
3
Lift the cover (see Figure 25).
4
Clean the glass platen and the white pressure platen carefully with a soft cloth
with a small quantity of “Cleaner A” applied to it.
See the safety data sheet in Appendix B for safety information.