Oce TDS400, Quick Reference Manual

Page: 48 / 95

48 Océ TDS400 Quick Reference Manual
da
[18] Move the roll in the lower paper drawer
6
Feed the material between the input guide platens against the rollers. Turn the
rollers until you see the material (see Figure 19). Also refer to the label inside
of the drawer.
[19] Move the material
See ‘How to cut the paper to get a straight leading strip’ on page 49 to cut the
paper to get a straight leading strip, or continue with the next step.
7
Close the lower paper compartment.
8
Press the ‘on-line’ key.