Oce TDS400, Quick Reference Manual

Page: 12 / 95

12 Océ TDS400 Quick Reference Manual
[2] The power switch on the scanner
▼
Turn the controller on
1
Press the button on the front of the controller.
The controller turns on.
▼
Turn the controller off
1
Select the ‘Shut down’ option from the Océ System Control Panel. You can do
this through both the controller and through Océ Remote Logic

.
2
Switch off the controller and the monitor.
3
Set the power switch at the rear of the printer to position ‘0’ (see Figure 1).
Note:
If you turn off the printer during a print job, you can loose
information or cause a paper jam.
Note:
If you turn the printer off, wait at least 5 seconds before you restart the
system.