Oce TDS400, Quick Reference Manual

Page: 34 / 95

34 Océ TDS400 Quick Reference Manual
How to scan-to-file
Scan-to-file is an option on the Océ TDS400. Enable this option by purchasing
a password (see the user manual for complete information).
▼
Scan-to-file
1
Insert the original face down.
2
Align the original right along the original guide on the scanner feed table. You
must see the line (see Figure 4 on page 26).
The scanner moves the original approximately 1 cm to a defined position.
3
Select ‘output’ type ‘file’.
4
Press the ‘start’ key to scan.
The original is scanned.
Océ View Station LT on the controller starts and shows the result of the scan
(see Figure 8).
[8] Océ View Station LT