Oce TDS100, User Manual

Page: 25 / 70

Use the Océ TDS100 25
Copy on a media roll (automatic roll feed)
Introduction
You can make the copies automatically on the 1 roll and 2 roll configuration.
The main steps of every automatic copy-job are the following.
1.
Feed the original
2.
Set up your copy job at the operator panel
3.
Press the green start button.
Before you begin
Turn on the Océ TDS100.
(see ‘Turn on and off the Océ TDS100’ on page 22).
Attention:
Feed strongly curled originals carefully, because the Océ
TDS100 pulls in the original.
How to copy automatically
1.
Place the original centrally and face down on the original feed table.
The Océ TDS100 moves the original to the back.
[7] Feed the original centrally and face down
[7] Feed the original centrally and face down