manualshive.com logo in svg

Oce PRISMAproduction, Reference Manual, Page: 79 / 139

Share
Download
Oce PRISMAproduction Reference Manual Download Page 79

 

Maintenance 

U20944-J-Z247-6-7600 

 

7 OPERATION 

In addition to the JES printer related commands supported by SPS (like $PPRTx,$SPRTx, 
$CPRTx, etc...) there are also some commands given directly to SPS (not via JES) to 
achieve some other functions. 

OS/390 (MVS) 

MVS Commands 

STOP (P) Command 

This MVS command allows the operator to terminate one SPS procedure when no 
printers are started. 

The format of this command is: 

P 

procid 

where: 

procid

 

is the procedure id used to start the SPS procedure and corresponds to 

the FSS id specified in the JES2PARM. 

When any printer is started for the specified procedure and the STOP command is issued 
SPS rejects the command with a message indicating that printer(s) are still active. 
Another STOP command has to be given later, after all FSS related printers are drained. 

JES Commands 

The following JES commands are supported by SPS & PP/ROUTER: 

$S Start device command 

The format of this command is: 

$P Stop device command 

The format of this command is: 

Summary of Contents for PRISMAproduction












































































































































Reviews:

No comments