Oce PRISMAproduction, Reference Manual

Page: 63 / 139

Installation and Customization
U20944-J-Z247-6-7600
All parameters are keywords. Their general format is KEYWORD(value1,...,valuen).
Keyword values must be enclosed by parentheses. Multiple keyword values must be
separated by commas. Blanks will be taken as part of the value if present. This means
keyword parameters interrupted by a continuation to the next record must be coded
through column 71 and begin in column 1 of the next record to avoid unwanted blanks.
Keyword parameters may be coded in any order on the control statement, however the
order suggested in the parameter descriptions will help to avoid errors and simplify
maintenance.
A keyword should not be coded more than once in a member unless specifically allowed.
1 COLUMNS 72
/* This example illustrates all the rules for statements and */
/* keywords. The entire example is valid syntax from the blank */
/* line above this comment to the blank line following the end */
/* of example comment. This comment is 5 null control statements */
/* of 1 line each */
/* Statement 1 */ KEYWORD1(value1,...,valuen) /* Possible comment */C
KEYWORD2(value1,...,valuen) /* Possible comment */C
KEYWORDn(value1,...,valuen) /* Possible comment */
/* The following statement illustrates key word continuation C
situations that are allowed. This comment is 1 null control C
statement of 3 lines */
/* Statement 2 */ KEYWORD1(value1,...,valuen) KEYWORC
D2(value1,...,valuen) /* Possible comment */ KEYWORDN(valC
ue1,...,valuen) /* Possible comment */
/* The following statement illustrates comment continuation */
/* situations. This comment is 1 null control statement of 1 line C
and 1 null control statement of 2 lines */
/* Statement 3 */KEYWORD1(value1,...,valuen)/* Possible continued C
comment */ KEYWORD2(value1,...,valuen) /C
* Possible continued comment */ KEYWORDn(value1,...,valuen)
/* End of Statement Syntax Example */
Figure 16: Statement Syntax Examples.
SPSPRINT / SETUPxxx supported parameters
PRT( printer name ) Is the device name defined to the spooling system that
ROUTER will control.
This parameter must be from 1 to 8 alphameric