Oce CS665 Pro, User Manual

Page: 397 / 495

12 Output applications
12-14 CS665 Pro
12.4 Output modes using Folding unit FD-503
Using Folding unit FD-503, the following punch/folding patterns are available:
Punch: Punches 2 or 4 holes in printed sheets for filing purposes. Specify the desired punch position
(left/right/top) according to the original set direction.
Folding: Six folding types are available - Z-Fold, Tri-Fold-in, Tri-Fold-out, Double Parallel, Gate Fold, and Half
Fold. Specify the print side (outside or inside) for each folding mode except Z-Fold.
With Folding unit FD-503 installed on the machine as a single finishing option, the two output trays are
available, to each of which is allotted with output modes as described below.
Primary (Main) tray: Half Fold, Z-Fold, Punch, Non-sort (straight delivery) Fold mode tray: Tri-Fold-in,
Tri-Fold-out, Double Parallel, Gate Fold
2
Note
A secondary (sub) tray is also available in place of the fold mode tray. Contact your service
representative, if desired.
80 mm
80 mm
Z-Fold Half Fold
Gate Fold Double Parallel
Tri-Fold-out
Tri-Fold-in