Oce CS665 Pro, User Manual

Page: 171 / 495

5 Troubleshooting
5-16 CS665 Pro
"PLEASE CHECK ORIGINAL" This message appears when the copier detects a non-standard paper size on the
original glass.
Select paper size and press [Start]. 1.000 magnification will be selected automat-
ically.
If this message continues to be displayed after selecting paper size, select 1.000
magnification, even if it is already indicated, then press [Start]. If desired, ask
your service representative to enable the machine to default to 1.000 magnifica-
tion in this situation.
SHEET INSERTION RESULT IS
NOT AS EXPECTED Blank insertion: Be sure manuscript originals do not already include blank sheets
in the locations designated for sheet insertion.
Print insertion: To ensure that chapter sheets in 1-2 mode always appear on the
right hand side in the finished set, insertion sheets must be designated on the
page setting screen with odd numbers, not even. If required, make an even num-
bered original page odd by inserting a blank sheet in front of that page, so that
the blank sheet is even and the insertion sheet is odd.
FINISHER STAPLE RESULT IS
NOT AS EXPECTED The 2 staple position functions only on copy paper that is loaded vertically (por-
trait style).
Check to see if Rotation functions. Release it, if necessary.
COPIES SKEW IN THE STAPLED
SETS Check to see if copy paper is excessively curled in the tray. Reload the copy pa-
per upside down.
Check to see if large-sized copies meet the secondary (sub) tray when fully out-
put before being stapled. Release the lock of the secondary (sub) tray, then
slightly lift it upward.
USING PUNCH, COPIES CAN-
NOT BE PUNCHED Check to see if the Punch Waste Basket indicator lights in red on the Machine
Status Screen.
Empty the waste basket.
COPIES CANNOT BE STAPLED
OR PUNCHED IN POSITION Check to make sure the side guide plates are securely aligned to the copy paper
in the paper tray to be used.
USING TRIMMING, COPIES
CANNOT BE TRIMMED Check to see if the Trim Waste indicator lights in red on the Machine Status
Screen.
Empty the waste basket of saddle stitcher, or contact the machine manager.
USING PERFECT BINDING,
COPIES CANNOT BE BOUND Check to see if the front door of perfect binder, perfect binder tray cover or paste
hopper cover is open.
Securely close the front door/perfect binder tray cover/paste hopper cover.
Symptom Remedy