Oce CS665 Pro, User Manual

Page: 154 / 495

CS665 Pro 4-49
Supplies & handling 4
4.11 Suspending/restarting output to Finisher FS-521
The Finisher FS-521 can hold 3,000 output sheets (1,500 sheets for sizes larger than A4 / 500 sheets for
smaller than B5) at maximum on the primary (main) tray.
Follow the procedure below to suspend the current output job in order to take out printed sheets from the
tray, and then to restart it.
2
Note
The Suspension button functions only when the printed sheets are delivered to the primary (main) tray
of Finisher FS-521.
To suspend the output job
1
Keep the Suspension button pressed till the LED starts
blinking.
To let the LED blink, keep the Suspension button pressed for
approximately one second.
The machine temporarily stops printing, and then the LED of
the Suspension button turns steady.
2
Take out the printed sheets delivered to the primary (main)
tray.
The LED of the Suspension button will go out when all sheets
are removed from the primary (main) tray.
– There will be no trouble in restarting the output job with
printed sheets left in the tray.
In this case, the LED of the Suspension button will remain
lit.
3
Press [Start] on the control panel to restart the output job.
The machine will resume printing.
!
Detail
To cancel the output job without restarting it, press [Stop]. See the following subsection "To cancel the
suspended job" for details.