Oce CS175 Phase 3, User'S Manual Controller

Page: 191 / 404

Setting up the PostScript driver (Windows) 6
CS175 6-27
2
Note
The installed option can be automatically registered in the “Option” list by
clicking the [Gather Option Information] button when connected to this
machine.
The [Gather Option Information] button can only be used when the SNMP
setting is enabled on this machine and the SNMP v1/v2c (IP) setting
check box is selected.
When the Mail Bin Kit is installed, you can assign output tray 1 and output
tray 2 as mail bins.
To assign the output destination of the mail bins, select “Bin Setting”
from “Administrator Setting” - “System Setting” - “Output Setting” on the
control panel.
If “Printer” is displayed when specifying the output destination in the
printer driver, the mail bin that is selected is shown in the figure.