Oce 9700, User Manual

Page: 92 / 220

92 Océ 9700 Copier/Printer User Manual
Defining the fixed zoom ratio
8 fixed zoom steps have been defined in the Océ 9700 as factory defaults. You
can define your own fixed zoom settings between 25 and 400%.
▼ ▼ ▼ ▼
Defining the zoom steps
1
Open the ‘Zoom’ card in the ‘Machine’ section.
2
Press the function button ‘Zoom steps 1’ (see figure 84).
[84] Zoom steps
3
Set the required value using the numeric or the higher/lower buttons.
Note:
The higher/lower buttons move up or down with steps of 0.1%. You
can also use the numeric button, e.g. 353 will lead to a zoom factor of
35.3%.
4
If required press the function button again to set the other zoom steps.
5
Press the function button ‘Zoom steps 2’.
6
Set the required value using the numeric or the higher/lower buttons.
7
If required press the function button again to set the other zoom steps.
8
When ready, quit the key operator mode.
..
...
....
...
....
...
....
...
....
...
....
..
...
....
...
....
...
....
...
....
...
....
..
...
....
...
....
...
....
...
....
...
....
..
...
....
...
....
...
....
...
....
...
....
......................................................................................................................................
................
Copy
................
Program
Ready to copy
................
Finishing
1.000
1.000
Zoom steps 1 Zoom steps 2
Horizontal
Vertical
25.0%
35.3%
50.0%
70.7%
141.0%
200.0%
282.8%
400.0%
Copies:
0
...
....
...
....
...
....
...
....
...
....
..
................
Machine
Calibration
Controller
Zoom
Timers
General