Oce 9700, User Manual

Page: 183 / 220

Overview and tables 183
Originals that can be used
Overview of originals
Originals Minimum Maximum recommended
Paper Width 110 mm (4.3") 1050 mm (41")
Image Width - 914 mm (36")
Length 210 mm (8.2") 6000 mm (19.7 feet)
Points of notice with regard to originals to be processed
Curls Originals with a curl diameter > 50 mm, can easily be scanned.
If the diameter of the curl is < 50 mm, it is advisable to uncurl the
leading edge to prevent problems.
Dog-ears should be straightened out, especially on originals with
reinforcement borders.
Damaged originals Torn originals should be repaired with tape, especially when torn
on their leading and side edges.
Holes in the original may cause problems with width measure-
ment, automatic exposure control, skewing correction or with the
original protection device.
Badly damaged originals can be copied by inserting them into car-
rier sheets.
Miscellaneous The leading edge of the original must be straight.
The thickness of the original may be maximal 1 mm.
Filing strips with a thickness < 1mm.
Any paper clips, staples etc. should be removed from the original
before feeding it into the scanner.
Creased leading edges should be straightened out.
Paste-ups should be taped down at the leading edge across the en-
tire width; a carrier sheet may be used (not thicker than 0.3 mm)
Folded originals should be straightened out before feeding, and
should be put in carrier sheets.
Feed plotter originals in carrier sheets.