Oce 9700, User Manual

Page: 68 / 220

68 Océ 9700 Copier/Printer User Manual
Copying non-standard size originals
The scanner of the Océ 9700 system automatically detects the width of the
inserted original. For European sizes, for example, it detects whether the width
is A0, A1, A2, A3, A4, 500 mm, or 700 mm. The Océ 9700 system uses a
memory table that contains all standard width - standard length combinations
to predict the length of the original. The scanner also measures the real length
of each original while it is transferred through the scanner.
Note:
If you are copying thick originals or originals in a carrier sheet, it is
recommended to use the output at the rear side of the scanner to ensure correct
delivery (see ‘Original delivery after scanning’ on page 45).
Defining the original width
To prevent information loss when copying a non-standard original, you can
select the ‘non-standard’ original width. The scanned width will then be larger
than the original width. It is also possible to define the scanned width and
length yourself.
▼ ▼ ▼ ▼
Defining the original width
1
Open the ‘Special original’ card in the ‘Copy’ section.
2
Press ‘Original width’ to select the required setting:
■
Standard. This option must be used to copy a standard-size original.
■
Non-standard. This option can be used to copy a non-standard original. The
scanned width will be larger than the original width, to prevent information
loss.