Oce 9600, User Manual

Page: 86 / 308

86 Océ 9600 Copier/Printer User Manual
File mode
File mode can be ‘Off’, ‘On’ or ‘On with check plot’. ‘Off’ means normal copy
mode. ‘On’ results in scan-to-file. Choose ‘On with check plot’ to scan to file
with a check plot. A check plot is a print of the scanned original, ensuring
consistency with a later re-print.
Note:
The Océ 9600 system does not allow you to change the ‘File mode’
setting during a set from ‘On’ to ‘Off ’ or vice versa. However, changing from
‘On’ to ‘On with checkplot’ and vice versa is allowed.
Note:
In scan-to-file mode, the automatic behavior is optimized for scanning.
Turning check plot on or off does not influence this automatic behavior
Destination
You can store your scan either in the temporary store on the controller or on a
network destination. You can define up to ten destinations in the Scan Manager
application. On the scanner operating panel you can choose one of these
destinations.
▼
▼ ▼
▼
Select a destination
1
Press the function button to select destination 1 through 4.
2
To select destinations four through ten, you have to begin by selecting
destination four. Press the arrow buttons to select destinations 4 through 10.
Note:
You can choose any name for the destinations. However, for your
convenience, you are able to define understandable nicknames in the Scan
Manager application (see ‘Create a destination’ on page 93).
File type
To define the internal organization of the scanned files, choose between TIFF
(Tagged Image File Format) and CALS-I (Continuous Acquisition and
Life-Cycle support).
TIFF
describes image data that typically comes from scanners, frame grabbers,
and paint- and photo-retouching programs. The purpose of TIFF is to describe
and store raster image data. A primary goal of TIFF is to provide a rich