Oce 9600, User Manual

Page: 121 / 308

The Océ 9600 applications 121
User modes
In order to block access from some users, you have to log in to a particular user
mode. The breakdown of user modes finds its origin in different target groups
with specific tasks and needs.
There are four different user modes:
■
Anonymous user mode
■
Repro operator mode
■
Key operator mode
■
System administrator mode
The anonymous user mode only offers monitoring capabilities. You are not
allowed to change anything.
The repro operator, the key operator and the system administrator modes allow
you to perform a number of particular user actions.
Note:
In the Queue Manager and the System Control Panel, the repro operator,
the key operator and the system administrator have the same user rights. In the
Settings Editor, however, the user modes offer different rights.
In repro operator mode, the operator is allowed to view settings only in the key
operator and system administrator modules.
In key operator mode, the operator is allowed to view and change settings in
the key operator module. The key operator is also allowed to view system
administration settings, but is not able to change them.
In system administrator mode, the operator is allowed to view and change
settings in the system administrator module. The system administrator is also
allowed to view key operator settings, but is not able to change them.
When you are not logged in (in anonymous user mode), the right-hand part of
the window where the settings are displayed, is shaded in.
Note:
The status bar at the bottom displays the active user mode.