Oce 9600, User Manual

Page: 29 / 308

Using the Océ 9600 Printer 29
Buttons
With the buttons on the operating panel, you can make a number of settings for
the Océ 9600 Printer, such as the media type and size or the preferred language.
The following buttons are available:
Button types
Function
Selection
buttons The selection buttons are located immediately below the
graphical display. The left button can be used to activate one
of the main menu choices (Language, Folding or
Media) on the left part of the display.
Note: A shadow highlighting effect is used to indicate the ac-
tive menu option.
The right selection button can be used to activate the options
on the right part of the graphical display.
Note: To identify the active selection, the dotted line around
this selection is changed into an uninterrupted line and the
small selection triangles next to the specified option are no
longer dimmed.
These selection triangles indicate that you can select an op-
tion from a predefined list with the help of the Up/Down but-
tons.
Up/Down
buttons These two triangular buttons to the right of the graphical dis-
play are used to display the next or previous option from the
selected menu choice and to select the desired option.
On line button
By pressing the on line button you can put the printer on line
or off line. If the green light above the on line button is on, the
printer is on line; if this light is off, the printer is off line.
Stop button
The red stop button is used to stop the present print job. After
this button is pressed, a dialog will display and ask for confir-
mation.
Note: The printing process does not stop instantaneously be-
cause a number of prints may already have been submitted to
the printer after processing. The prints cannot be stopped.
Key button The green key button has no function.