Oce 9600, User Manual

Page: 36 / 308

36 Océ 9600 Copier/Printer User Manual
Off-line folding settings
On the Océ 9600 Printer operating panel, you can specify the settings you
want to use for off-line folding. These settings include defining the length and
width of the folded package, enabling and defining the binding edge, selecting
the input method and legend position and cleaning the reinforcement knife.
▼
▼ ▼
▼
Make off-line folding settings
1
Press the on line button on the printer operating panel to put the printer off line.
The ‘Off line’ message is displayed in the status window.
2
Activate the Folding option by pressing the left selection button.
The dotted line around the current selection is changed into an uninterrupted
line and the small selection triangles next to the specified option are no longer
dimmed.
3
Use the up/down buttons to toggle through the available options.
4
Activate the Input option and press the right selection button to activate the
Legend option.
5
If necessary, change the value in the Legend field with the up/down buttons.
6
Press the right selection button again to activate the Method option.
7
If necessary, change the value in the Width field with the up/down buttons.
8
Press the left selection button again and use the up/down buttons to select
another option. This can be Package (with sub-options Length and Width),
Binding (with suboptions Size and Binding), or Special (with sub-option
Knife).
9
Make any desired settings.
10
Put the printer on line again by pressing the on line button. The printer now
uses the specified off-line folding settings.