- 19 -
Description
: This is to make all settings (except for the password) back to factory default.
Note
: Turn on the device, press the SOS button for five times continuously and the red LED will be on, and
then send (within 120 seconds) this SMS to the tracker.
### is the ending character and is required in the text message.
Example
: W000000,990,099###
19. Password Initialization
Command
: W888888,999,666
Description
: This is to make the password back to factory default in case you forget your password.
Note
: Turn on the tracker, press the SOS button for five times continuously and the red LED will be on, and
then send this SMS (within 120 seconds) to the tracker to make the password back to factory default
(000000).
Example
: W888888,999,666
For more details regarding SMS commands, please go to Annex 1 Command List
20. Parameter Editor
The tracker can be configured by computer using the Parameter Editor.
GPS Tracker Parameter Editor V1.39
Please refer to <GPS Tracker Parameter Editor> for more information.
21. Copyright and Disclaimer
© Shenzhen Meiligao Electronics Co., Ltd. All rights reserved.
The information contained herein may be changed at any time without prior notification. This manual nor
any parts thereof may not be reproduced for any purpose whatsoever without the express written consent
of Meiligao, nor transmitted in any form either electronically or mechanically, including photocopying and
recording.
In no event shall Meiligao be liable for direct, indirect, special, incidental, or consequential damages
(including but not limited to economic loss, such as loss of profits, loss of use of profits, loss of business or
business interruption, loss of revenue, loss of goodwill or loss of anticipated savings) arising out of the use
or inability to use the product or documentation, even if advised of the possibility of such damages.