29
36x PTZ Dome Camera User Manual
SECTION 4: USING THE OSD MENUS
4.3.11 Configuring OSD settings
The on-screen display of the PTZ movements, temperature, system time, etc. can be enabled or disabled.
1.
Open the display settings menu: Go to:
MAIN MENUS
g
DOME SETUP
g
SYS PARAMETER SETUP
g
DISPLAY
SETUP
Display settings
2.
Move the cursor to
DISPLAY SETUP
using the direction buttons and click
IRIS+
to enter.
3.
Move the cursor to the target item and click
IRIS+
and click up/down direction buttons to choose each display mode as ON
or OFF, and define each display time as 2 seconds, 5 seconds or 10 seconds.
4.
Click
IRIS+
button to confirm.
Display the viewing direction
The camera displays a viewing direction code when you manually rotate the camera. Codes are shown in the table below.
Display
N
NE
E
SE
S
SW
W
NW
Indication*
North
Northeast
East
Southeast
South
Southwest
West
Northwest
* The north direction refers to the 0º angle (initial position).
The temperature display refers to the internal temperature of the camera.
Summary of Contents for The BLACK Line BLK-PTZ36X
Page 8: ...viii TABLE OF CONTENTS...
