14
SECTION 2: INSTALLATION
Remote control device (DVR)
Camera
Monitor
Network cabling
2.
Connect the network power and ground, RS-485, and video cables to the camera drop cable connectors.
RS-485 –
RS-485 +
24 Vac
Ground
24 Vac
Camera drop cable
Video output
Drop cable connections
3.
Connect the network power and ground, RS-485, and video cables to the remote control device and 24 Vac power source.
4.
Connect the video output and RS-485 and video output cables to your network extension cables. Connect the other end of
these cables to a remote control device, such as a DVR.
5.
When power is applied to the camera, a system information display will appear for 2 minutes on top of the live video image
from the camera. Verify that the information on the display is intelligible.
Summary of Contents for The BLACK Line BLK-PTZ36X
Page 8: ...viii TABLE OF CONTENTS...
