O2 Mars II X da Zinc User Manual Download Page 62

Page: 62 / 110

You can use your device to connect to another device with infrared capabilities.
To connect to another device via infrared:

1. Setup the device you want to connect to receive infrared beams. Refer to the technical

documentation that came with the device.

2. Configure your device to receive infrared beams. Tap

Start

Settings

Connections

tab then tap

Beam

icon.

3. Tap to check

Receive all incoming beams

4. Tap

5. Line up the infrared ports of both devices. Make sure that they are unobstructed and

within range.

6. Send data from the source device. Upon connection, your device prompts that data is

being received. Tap

Cancel

if you want to stop transfer.

7. When finished, tap

Yes

to accept and save data or tap

to discard data.

Using Infrared (IR)

Summary of Contents for Mars II X da Zinc















































































































Search results

Summary of Contents for Mars II X da Zinc

Reviews:

Related manuals for Mars II X da Zinc

Brands by name

Popular brands

O2 Mars II X da Zinc, User Manual

Search results

Summary of Contents for Mars II X da Zinc

Reviews:

Related manuals for Mars II X da Zinc

Brands by name

Popular brands