O2 Mars II X da Zinc User Manual Download Page 109 | Manualshive

Page: 109 / 110

background image

FCC Regulations:

z

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

z

This device has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiated radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance

could void the user‘s authority to operate the equipment.

«
...
107
108
109
110
»

Summary of Contents for Mars II X da Zinc















































































































Reviews:

No comments

Related manuals for Mars II X da Zinc

Brand: M2M Pages: 88

Brand: Samsung Pages: 98

Memoir SGH t929

Brand: Samsung Pages: 200

Brand: Topcom Pages: 76

Brand: Majestic Pages: 37

Brand: M4 Pages: 22

Brand: OfficeServ Pages: 38

Brand: iBall Pages: 80

Brand: ORA Pages: 26

Brand: V7 Pages: 20

Brand: AEI Pages: 5

Brand: Mitel Pages: 42

CONFERENCE MAX NDA-31109

Brand: NEC Pages: 5

Brand: Emerson Pages: 114

Brand: Sharp Pages: 140

Brand: GENERAL MOBILE Pages: 16

Brand: Motorola Pages: 62

Brand: Motorola Pages: 212

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands