O2 Mars II X da Zinc User Manual Download Page 13

Page: 13 / 110

Device components description

No.

Item

Description

Navigation pad

Press this multi-directional control up, down, left, or right to move

through menus, program instructions; carry out the selection by

pressing the center button.

Right Soft key

Performs the task indicated above the button.

Messaging

Press to quick start your Messaging.

End button

Press to end a call.

Self-Portrait Mirror

Press this multi-directional control up, down, left, or right to move

through menus.

Camera lens

This 2-megapixel camera comes with Auto-Focus (AF) lens and flash

light features.

Camera flash light

Allows you to capture images in a dim environment.

Battery compartment

Contains the battery that supplies power to the device.

Infrared (IR) port

Allows you to beam data to another device that has an infrared port.

Camera Button

Press to launch the camera. In camera mode, half-press to auto-focus

then full-press to take a picture. In video mode, full-press to start

recording video and press again to stop.

Earphone Jack

Allows you to listen to audio media or use the phone’s hands-free kit.

Mini-USB connector

Use this connector to synchronize your data or to charge the battery.

Summary of Contents for Mars II X da Zinc















































































































Search results

Summary of Contents for Mars II X da Zinc

Reviews:

Related manuals for Mars II X da Zinc

Brands by name

Popular brands

O2 Mars II X da Zinc, User Manual

Search results

Summary of Contents for Mars II X da Zinc

Reviews:

Related manuals for Mars II X da Zinc

Brands by name

Popular brands