=>tftp 100000 PBL1.bin
=>sf probe 0
=>sf erase 0 100000
=>sf write 100000 0 $filesize
2. Write u-boot.bin at offset 0x40000 (256 KB):
=>tftp 100000 u-boot.bin
=>sf write 100000 40000 $filesize
3. Write FMan microcode to eSPI from offset 0x110000:
=>tftp 100000 fsl_fman_ucode_xx.bin
=>sf erase 110000 10000
=>sf write 100000 110000 $filesize
4. Shut down the board.
5. Change board switch configuration for eSPI boot.
6. Switch on the board.
NOTE
For more information about building U-Boot images,
generating PBL images, see
in SDK
documentation.
4.6.3 Flashing NAND boot images
The steps for flashing and updating images for NAND are as follows:
All operations are done on the target in the U-Boot console.
1. Write PBL1.bin to NAND from offset 0x0:
=>tftp 100000 PBL1.bin
=>nand info
=>nand erase 0 100000
=>nand write 100000 0 $filesize
2. Write u-boot.bin to NAND from offset 0x40000 (256 KB):
=>tftp 100000 u-boot.bin
=>nand write 100000 40000 $filesize
3. Write FMan microcode to NAND from offset 0x180000:
=>nand info
=>tftp 100000 fsl_fman_ucode_xx.bin
=>nand erase 180000 80000
=>nand write 100000 180000 $filesize
4. Shut down the board.
5. Change board switch configuration for NAND boot.
6. Switch on the board.
Flashing and updating images
QorIQ T1040 Reference Design Board User Guide, Rev. 0, 06/2015
62
Freescale Semiconductor, Inc.
Summary of Contents for QorIQ T1040
Page 1: ...QorIQ T1040 Reference Design Board User Guide Document Number T1040RDBPAUG Rev 0 06 2015...
Page 2: ...QorIQ T1040 Reference Design Board User Guide Rev 0 06 2015 2 Freescale Semiconductor Inc...
Page 6: ...QorIQ T1040 Reference Design Board User Guide Rev 0 06 2015 6 Freescale Semiconductor Inc...
Page 66: ...QorIQ T1040 Reference Design Board User Guide Rev 0 06 2015 66 Freescale Semiconductor Inc...