Table 4-2. Image layout in NOR flash
Start address
End address
Image
Max size
0xEFF40000
0xEFFFFFFF
U-Boot (current bank)
768KB
0xEFF20000
0xEFF3FFFF
U-Boot env (current bank)
128KB
0xEFF10000
0XEFF1FFFF
QUICC Engine microcode (current bank)
64KB
0xEFF00000
0xEFF0FFFF
FMan microcode (current bank)
64KB
0xED300000
0xEFEFFFFF
rootfs (alternative bank)
43MB
0xEC800000
0xEC8FFFFF
Hardware device tree (alternative bank)
1MB
0xEC020000
0XEC7FFFFF
Linux.uImage (alternative bank)
7MB+875KB
0xEC000000
0XEC01FFFF
RCW (alternative bank)
7MB+875KB
0xEBF40000
0XEBFFFFFF
U-Boot (alternative bank)
768KB
0xEBF20000
0XEBF3FFFF
U-Boot env (alternative bank)
128KB
0xEBF10000
0XEBF1FFFF
QUICC Engine microcode (alt bank)
64KB
0XEBF00000
0XEBF0FFFF
FMan microcode (alternative bank)
64KB
0xE9300000
0XEBEFFFFF
rootfs (current bank)
43MB
0XE8800000
0XE88FFFFF
Hardware device tree (current bank)
1MB
0xE8020000
0xE86FFFFF
Linux.uImage (current bank)
7MB+875KB
0xE8000000
0xE801FFFF
RCW (current bank)
128KB
4.4 Switch settings
This chapter defines the default switch settings and other boot source settings.
NOTE
You may find slightly different default switch settings,
depending on the SDK being used; check the relevant
information.
4.4.1 Switch default settings (NOR flash boot)
This section defines the default switch settings for NOR flash boot.
NOTE
ON and OFF are being represented as 0 and 1 respectively, on
the board.
Switch settings
QorIQ T1040 Reference Design Board User Guide, Rev. 0, 06/2015
58
Freescale Semiconductor, Inc.
Summary of Contents for QorIQ T1040
Page 1: ...QorIQ T1040 Reference Design Board User Guide Document Number T1040RDBPAUG Rev 0 06 2015...
Page 2: ...QorIQ T1040 Reference Design Board User Guide Rev 0 06 2015 2 Freescale Semiconductor Inc...
Page 6: ...QorIQ T1040 Reference Design Board User Guide Rev 0 06 2015 6 Freescale Semiconductor Inc...
Page 66: ...QorIQ T1040 Reference Design Board User Guide Rev 0 06 2015 66 Freescale Semiconductor Inc...