NXP Semiconductors QorIQ FRDM-LS1012A, Reference Manual, Page: 6 / 31

Table 1-1. Related documentation
Document Description
QorIQ FRDM-LS1012A board Getting Started Guide Explains the FRDM-LS1012A settings and physical
connections needed to boot the board.
FRDM-LS1012A Errata Lists and describes all known errata for the FRDM-LS1012A.
It also describes the available workaround for each errata and
their detailed explanation, where necessary.
QorIQ LS1012A Family Reference Manual Provides a detailed description of the LS1012A processor and
of some of its features, such as memory mapping, interfaces,
chip features, and clock information.
QorIQ LS1012A Data Sheet Contains the LS1012A information on pin assignments,
electrical characteristics, package information, and ordering
information.
LS1012A Chip Errata Lists the details of all known silicon errata for LS1012A.
QorIQ LS1012A Design Checklist, AN5192 This document provides recommendations for new designs
based on LS1012A.
This document can also be used to debug newly-designed
systems by highlighting those aspects of a design that merit
special attention during initial system start-up.
1.3 Acronyms and abbreviations
The following table lists the acronyms and abbreviations used in this document.
Table 1-2. Acronyms and abbreviations
Term Description
DDR Double Data Rate
DRAM Dynamic random-access memory
DUART Dual universal asynchronous receiver/transmitter
DUT Device Under Test
FET Field-effect transistor
GPIO General-purpose input/output
I2C Inter-Integrated Circuit Multi-Master Serial Computer Bus
JTAG Joint Test Action Group (IEEE 1149.1 standard)
LDO Low-dropout
OTG On-The-Go
PLL Phased Lock Loop
PS Power supply
PSU Power supply unit
RCW Reset Configuration Word
SDA Serial data line
SerDes Serializer/deserializer used to interface with serial interfaces, such as PCIe, SGMII, and SATA
Table continues on the next page...
Acronyms and abbreviations
QorIQ FRDM-LS1012A Board Reference Manual, Rev. 3, 12/2016
6 NXP Semiconductors