manualshive.com logo in svg

NW Explorations Morveren, Operating Manual

Share
Download
NW Explorations Morveren Operating Manual Download Page 55

Icemaker on F/B.

4N:  Galley & Appliances

Morveren is fitted with a number of appliances for your convenience.  Most of these (like

the microwave) are easy to operate, “just like a home appliance”; nevertheless, we will spend
some time discussing these, as marine units have some features that are slightly different than
home models.

4N1:  Barbecue

The boat carries a propane barbecue which is located atop

the top of the aft salon doorway on the flybridge.  Its propane is in
a tank under the forward port seat on the flybridge.

To operate the barbecue:

1. Be sure the propane tank valve is on;
2. Turn the valve to the right of the grill to “High”
3. Press the igniter button or use a “propane match” to

light the grill.

4N2:  Cooktop

The yacht is equipped with an electric cooktop in the galley which operates

conventionally.  The “cooktop” breaker in the power panel must be
on, and either generator or 50-amp shore power must be
available for operation.

4N3:  Ice Maker

Morveren has a standard ice maker on the flybridge in the

port cabinet between the seats.  It operates conventionally.

4N3:  Microwave/Convection Oven

The microwave is conventional, operating just as one does in the home ashore.  It runs

off the gerator, shore power, or the inverter.

4N4:  Refrigerator & Freezer - Galley

The boat is equipped with efficient built in refrigeration in two galley units, and

undercounter freezer and an undercounter refrigerator. The refrigeration runs on 12 volts DC.

Refrigeration temperatures are controlled by the thermostat in the back of each unit; set

as required after allowing the temperature to stabilize for a few hours after loading.

Section 4N: Galley & Appliances  4.35

Summary of Contents for Morveren









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands