13
EN
TECHNICAL OWNER MANUAL
3.5 Installing the Shifter
1.
Install right brake lever according to the
manufacturer’s instruction.
2.
Slide the shifter (
A
) onto the handlebar.
3.
Install the right hand grip (
B
) onto the
handlebar according to the manufacturer’s
instructions
4.
Position the shifter such that the display (
C
)
is visible to the rider and the cable will be
unobstructed
•
Tighten the clamp bolt to 2.0-2.5 Nm (18-
22 in-lbs).
Never use lubricants or solvents to
install handlebar grips.
Make sure that the shifter and the
brake lever function properly and are
unobstructed (re-adjust if necessary).
Never ride without the handlebar
grips. The turning grip of the shifter
could become loose. This can result
in a severe injury.
NFINITY
ASSEMBLY OF COMPONENTS
C
A
B
A
B
C
!
!
!
