Nussbaum BM 15 Touch, Instruction Manual

Page: 53 / 90

AD W9002 N 05.04.2011 53
The calibration of the gauge arms is fi nished
057
7 Centering and clamping means
!
Suitable centering and clamping means are re-
quired to fi x a wheel onto the balance machine. It
should be clean and undamaged in order to ena-
ble a high accuracy when balancing a wheel.
7.1 Mid centering device
(Extend of delivery)
For all car wheels with a hole in the centre and which
therefore are able to be clamped using the centering
and clamping means provided with the machine.
The scope of delivery includes 3 centering cones for rims
with a centre bore of between 42 mm and 111 mm.
Further cones and centering means are available as
special accessories for larger type wheels such as those
for SUVs and transporters.
!
Important to note that only when dismounting the
complete centering means is it important to re-
mount it in the correct position i.e. with the red in-
dication mark (20) on the main shaft in line with the
threaded hole for the calibration weight.
058
20