Nussbaum BM 15 Touch, Instruction Manual

Page: 44 / 90

44 05.04.2011 AD W9002 N
To measure wheel data move the inner gauge arm
to the desired position of the wheel weights that have
been set in the screen “balancing program”
Move the inner gauge arm (10) to the position and wait
for an audible signal. Then move the arm back to the
home position and an audible signal is heard.
ONLY BM 45 Touch and BM 55 Touch:
to the position and hold in place until an audible signal
is heard.
Replace the gauge back into its home position a long
audible signal is heard.
Input of wheel data in balancing program STEEL 025
Input of wheel data in balancing program ALU 026
for adhesive wheel weights (shown fort he left wheel weight)
The inner gauge arm is taken to input the DISTANCE
and DIAMETER, the outer gauge arm is used to input the
WIDTH.
As soon as the gauge arm is returned to ist home positi-
on the screen switches to the display of the wheel data
and the values are shown.
027
i
The values can be changed manually if required.
If you touch the area of a value a number fi eld
shows up that allows to enter the data. The data
can also be changed by touching the + or - but-
ton.
Example of a manual data entry 028
8
10
10