Operating Instruction and Documentation
4.50 SL
- 47 -
Clean the lift and the floor with a non-aggressive and non-abrasive detergent. Use a gentle
detergent to clean the parts. Use an standard washing-up liquid and lukewarm water.
- Do not use steam jet cleaners.
- Remove all dirt carefully with a sponge or if necessary with a brush.
- Ensure that no washing-up liquid is left on the lift after cleaning.
- Do not use aggressive means for cleaning the workshop floor and the automotive lift.
- A permanent contact with any kind of liquid is not allowed. Do not use high
pressure devices
for cleaning the lift.
- After cleaning dry the automotive-lift with a suitable type of cloth and inject it with a wax spray
or an oil spray.
7.3 Adjust the Polylex-belt
If the V-belt was exchanged, the V-belt must be adjusted, again. Remove the cover of the V-belt.
pic 10: cover of the belt (version with raising pipe)
1: column
2: raising pipe
3: cover of the belt
4: spindle
The new V-belt tension must be adjusted at the stretch device. (pic.11). Loose the three screws
at the motor easily. (pic. 11, No.1). The belt can be loosened or tightened at the screws. (pic.11,
No.2).
pic 11:
position of the belt
1: raising pipe
2: stretch device
3: V-belt pulley
4: Polyflex-belt
5: shaft of the moto
r
pic 12: adjust the belt tension
1: the three screws of the motor
2: adjusting screws
The belt tension gets adjusted with the help of an accessory. (pic. 13; This accessory can be
ordered from Nußbaum).
pic 13:
accessory
Summary of Contents for 4.50 SL
