Operating Instruction and Documentation
4.50 SL
- 39 -
5. Operating instructions
The Safety Regulations must be observed and adhered to while working with the
automotive lift. Read the safety regulations in chapter 4 carefully before working with
the lift!
5.1 Lifting the vehicle
• Drive the vehicle onto the middle of the lift.
The complete wheels must be standing on the platform, otherwise the vehicle can fall
down.
• Secure the vehicle against rolling, put into gear, apply the hand brake.
• Control the dangerous places of the lift and be sure that there are no objects or people in
the immediate area of the lift or on the lift.
• Switch on the main switch. Raise the vehicle Press the button „Lifting“.
• Raise the vehicle to the required working height. Press the button “lifting“ .
• The roll over and roll back safe device must be activated when the lift was slightly raised.
• Observe the complete process.
Check the safe position of the vehicle on the platform.
The automotive-lift can regulate several times depending upon distribution of the load.
5.2 Synchronism of the automotive lift
• The lift is equipped with an electronic synchronism.
• At the columns are potentiometer which recognizes the actual-position of the spindle.
• A lifting carriage is faster like the other lifting carriage. No matter whether when lifting or
lowering. The electronic control system observe this procedure and stops the fastest
carriage so long until all carriage have the same height again. The permitted regulation
range is 18 mm.
pic: operating elements
1 Main
switch
2 Keyboard and LC-Display
3 Button
„Lifting“
4 Button „Lowering“
5 Button
„Equalisation“
6 Red light „Malfunction“
7 Switch „Lighting“ (optional)
Summary of Contents for 4.50 SL
