Operating Instruction and Documentation
4.50 SL
- 44 -
• Open the electrical box.
• Press the button (see pic 5) and hold it pressed and press simultaneously the button „lifting“
until the lift stops at the reference point. Turn off the main switch.
pic 5: button „reference point“
The reference point is marked at every column. Examine the points with the carriage.
In case the level of the carriage and the reference point is not on the same height, level out
manually the carriage at the spindle until the level is ok. In this case the main switch must be
turned off.
Remove the cover at the top of the columns and turn the spindle with a suitable tool until
the carriage is on the „reference point“.
switch power back and push on the keypad # enter 1234 and #, with the * go to
menu point "reference point" and enter #
now confirm with # again.
push * several times to get to the menu point "return" and confirm with #
finished.
7. Inspection and Maintenance
Before conducting maintenance work, preparations must be made to ensure that
during maintenance and repair work there is no risk to the safety of people working on
or around the lift and also that there is no risk of damage to equipment being used on
or around the lift.
German legal guidelines : BSV (Prescription of working tools) + BGR500 (Work with
working tools)
To guarantee the utmost availability and to ensure that the lift remains functional,
maintenance work contracts are organised between our clients and their local retailers.
A service must be performed at regular intervals of 3 months through the operator in
accordance with following service manual. If the lift is in continuous operation or in a dirty
environment, the maintenance rate must be increased.
During daily operation the lift must be closely observed to ensure that it is functioning
correctly. In the case of malfunction or leakage the technical service must be informed.
7.1 Maintenance plan of the lift
Before beginning any maintenance work isolate the power supply. Secure the main switch
(lock it). Secure the danger area around the automotive lift and secure the lift against
unintentional lowering.
a
Grease the spindle bearing annually with a multipurpose fat.
Remove the cover of the spindle (see g).
Summary of Contents for 4.50 SL
