Nuna Prym, Manual, Page: 17 / 236

20 19
PRYM instructions PRYM instructions
EN EN
3 -
Unlock the buckle of the harnesses by pressing
the red button. (38)
4 -
Fix the buckles on the both sides of the seat
which located on the both sides of seat to make
placing the child in forward facing mode more
convenient.
(39)
5 -
When installing the enhanced child restraint in
the forward facing mode, do not use the infant
insert.
6 -
Place the child into the enhanced child restraint
and pass both arms through the harnesses.
Engage the buckle. Please refer to (31) .
7 -
Tighten the shoulder harness straps by pulling the
adjustment webbing. (40)
Make sure the space between the child and the
shoulder harness straps is about the thickness of
one hand.
Detach Soft Goods
1 -
Open the buckle
(41)
, then remove the infant
insert.
2 -
Detach the hook and loop fasteners to remove the
shoulder harnesses cover. (42)
3 -
Open the snaps. (43)
4 -
Open the snaps on the main seat pad behind
shoulder harnesses. (44)
Toddler Mode (Forward Facing Mode)
Forward Facing
Child height 76cm-105cm/ Child weight≤18kg
Recline position
Position 1-7
NOT allowed to use forward facing before the age
of 15 month.
1 -
Please slide Smart Ride™ lock-off to left when
enhanced child restraint used in forward facing
mode. (33)
2 -
Press the rotating button to rotate the seat to the
forward facing position. (34)(35)
The ISOFIX connectors must be attached and
locked onto the ISOFIX anchor points.
(35)-1
The load leg must be installed correctly with
green indicator. (35)-2
Securing Child
After the child is placed into the seat, check whether
the shoulder harness straps are at proper height.
1 -
Press the rotating button to rotate for easier side
loading/unloading of the child. (36)
2 -
Press the harness adjustment button, while
pulling out the shoulder harnesses to the desired
(Pull from below the fixed shoulder pads to
lengthen) length.
(37)