Numerik Jena Kit L Series User Manual Download Page 37

Page: 37 / 58

Signal Adjustment with ADJUSTMENT TOOL

Before delivery the encoders from NUMERIK JENA will be tested and electronically adjusted under

ideal mounting conditions. Furthermore, the sensor modules offer the possibility of an electronic signal

adjustment after the mounting into the application� This allows the user optimize the encoder signals

regarding to the mechanical mounting conditions (tolerances).

The ADJUSTMENT TOOL and the related EPIFLEX software was designed to simplify and make the

signal adjustment more effective.

8.1

Functions of the ADJUSTMENT TOOL

•

Representation of the sinusoidal counting signals with amplitude, offset and phase position

• Representation of the position and width of the index signal

• Evaluation of the mechanical mounting conditions

• Automatic signal adjustment and programming of the sensor module

•

Electronic readjustment of the amplitude and offset of the sensor signals

• Adjustment of the position and width of the index signal

8.2

Dynamic Offset and Amplitude Control (Online Compensation)

The encoders of NUMERIK JENA are equipped with a dynamic amplitude and offset control (online

compensation). The analog diode signals will be corrected to their nominal values in real time. This

reduces measuring errors caused by contamination as well as from inaccuracies� The phase position

between the sine and cosine signals and the position of the index signal are not influenced by the

online compensation�

With help of the EPIFLEX Software the preadjusted nominal values of the online compensation can be

influenced.

8.3

Scope of Delivery

• ADJUSTMENT TOOL black box

• Diagnostic cable to connect the measuring system

• USB cable to connect a PC

•

USB - D-SUB - adapter cable (15-pin)

• Exchangeable 8-pin plug connectors

Image 24

37/58

KIT

-Series

Summary of Contents for Kit L Series



























































Search results

Summary of Contents for Kit L Series

Reviews:

Related manuals for Kit L Series

Brands by name

Popular brands

Numerik Jena Kit L Series, User Manual

Search results

Summary of Contents for Kit L Series

Reviews:

Related manuals for Kit L Series

Brands by name

Popular brands