Numerik Jena Kit L Series User Manual Download Page 29

Page: 29 / 58

General Installation Notes

7.1

Delivery Contents

Standard

•

Kit L2 and Kit L4 scanning head (according to the ordered specification)

•

SINGLEFLEX or DOUBLEFLEX scale tape (according to the ordered specification)

•

Spacing gage for mounting the scanning head (made of plastic with marking „0,6“)

• Information sheet

Optional

• ADJUSTMENT TOOL

• Extension cable

7.2

Installation Position

• The installation position of the measuring system is arbitrary�

• In order to avoid contamination deposits, a vertical position for the scale tape is recommended�

• The operator of the measuring system is responsible for appropriate design measures to protect

the encoders from contamination�

• In any installation position the scale tape surface and scanning window of the scanning head

should be easily accessible for cleaning� Prevent contamination and foreign elements from having

an influence on the operation!

• Use preferably slots or edges as an installation orientation for straight mounting of the scale tapes,

particularly very long ones�

• For DOUBLEFLEX scale tapes, slots and edges also serve as a stop to prevent any displacement

between the scale tape and the carrier tape�

• The measuring properties of the DOUBLEFLEX scale tape are the result of the adhesive layer

between the scale tape and the carrier tape� Do not displace the scale tape and carrier tape relative

to each other, or separate them from each other!

•

If the DOUBLEFLEX scale tape will be mounted vertically, the fixing point must be located at the

top� Otherwise the scale tape can detach itself from the carrier tape!

• If the DOUBLEFLEX scale tape will be mounted perpendicular, it must be supported and lie on an

edge or a carrier tape�

29/58

KIT

-Series

Summary of Contents for Kit L Series



























































Search results

Summary of Contents for Kit L Series

Reviews:

Related manuals for Kit L Series

Brands by name

Popular brands

Numerik Jena Kit L Series, User Manual

Search results

Summary of Contents for Kit L Series

Reviews:

Related manuals for Kit L Series

Brands by name

Popular brands