41
6.9 Talking to your baby
You can use the “Talk back” function to
speak to your baby.
1. Hold down the
TALK 24
button on the
parent unit.
shows the
TALK symbol.
2. At the same time, speak into the
microphone
on the parent unit.
Your baby can now hear your voice from
the loudspeaker
on the baby unit.
3. Release the
TALK 24
button in order to
hear the baby’s reaction.
The TALK symbol disappears.
Notes:
– If the baby unit
is in Eco-Mode, this
function is deactivated so that you do
not inadvertently wake your baby. In
this case, two consecutive beeps will
remind you that the talk-back function
is currently not available.
The display
shows a
flashing TALK symbol.
– If the volume of the parent unit is set to
“MUTE” (see "6.6
39), it will automatically be
increased to level 1 as soon as you
press the
TALK 24
button.
6.10 Lullabies
To soothe baby to sleep, you can play
lullabies on the loudspeaker
of the baby
unit.
Note:
You can alternatively switch the
lullabies on and off from the baby unit itself
(see "5.3 Lullabies" on page 36).
The previously selected lullaby will play in a
loop for about 20 minutes and the “Lullaby”
function will then automatically switch off.
1. You activate the function by briefly pressing
the
Lullabies on/off
button
The first song will be played and
at the same time the musical
note symbol will appear on the
display
of the parent unit.
A choice of four different lullabies and one
track of natural sounds are available.
2. You switch to the next song by holding
down the
Lullabies on/off
.
The musical note symbol on the
display
will flash briefly and
then the next song will be
played.
3. You switch the function off by again
briefly pressing the
Lullabies on/off
button
The musical note symbol disappears.
Caution!
We recommend that you do not
use the mute setting on the parent unit while
lullabies are being played, because this
would leave you with no monitoring
functions at all and quite unable to hear if
your baby cries.
Note:
The five LEDs
are switched off
while lullabies are playing, because the
device cannot distinguish between a baby
crying and a lullaby being played, but you
will still be able to hear if your baby is crying
in the background.
Lullabies in Eco-Mode
Please note!
There are a number of special
features while the babyphone is in Eco-
Mode (see "4.5 Eco-Mode and FULL-ECO-
CONTROL" on page 35):
• The “Lullaby” function is temporarily
deactivated so that you do not
inadvertently disturb baby.
In this case the musical note
symbol will flash while the
FULL-ECO-CONTROL function
checks the connection between
the two units.
– To prevent the lullabies switching on
later, you can again press the
Lullabies
on/off
button
to immediately cancel
the function. The flashing symbol will
then disappear from the display.
