34
As soon as the connection has been
established, the connection indicator on
the parent unit
and the VOX LED on
the baby unit
will light up green.
If the connection indicator
begins to
flash green, this means that there is a
connection between the parent unit and
the baby unit, but your baby is currently
asleep and therefore the device has
automatically activated Eco-Mode to
reduce the high-frequency radiation in
the children’s room and save energy.
In the event that the connection between
the parent unit and the baby unit breaks
down, the devices will automatically attempt
to establish a new one.
If a new connection is not established within
30 seconds, the parent unit
will emit a
regular beep and the connection
indicator
will light up red. You may need
to move the parent unit to a different
location before a new connection can be
established.
3. First go and check on baby to make sure
everything is OK.
4. Then try to set up a new connection by
moving about.
The connection will be automatically re-
established as soon as you are within
range.
As soon as the connection has been set
up the connection indicator
will again
light up green.
4.4 Power supply
• The power supply for the baby unit
works only via the mains adapter.
• The parent unit
can be operated using
the battery with no mains connection for
up to 18 hours.
Displays
The level of charge in the battery is indicated
by the LED
POWER
. While the parent unit
is switched on, its level of battery charge is
indicated by the additional battery symbol in
the display:
Charging the parent unit
can be connected to the
mains supply and is then powered via the
mains adapter. This charges the battery at
the same time.
LED
is green
and continuously
on
Battery is fully charged
LED
is green
and continuously
on
Battery is partially
charged
LED
is red and
continuously on
Beeps at one
minute intervals
Battery is almost empty.
Depending on how it is
being used, the device
will automatically switch
off within the next 15-20
minutes. We therefore
recommend you to con-
nect the device to the
mains supply in order to
recharge the battery.
flashes
LED
flashes
red
Beeps at one
minute intervals
The battery is empty and
the device will switch
itself off almost
immediately.
Bars run across the display
LED
flashes green:
The device is connected to mains power and
the battery is being recharged.
The animation stops as soon as the battery
is fully charged, but the LED continues to
flash while the device is connected to mains
power.
