33
4. Starting the device
Note:
Always connect the cables before
inserting the mains adapter into the socket.
4.1 Connecting the parent
unit
The parent unit is powered by the supplied
rechargeable LiPo battery. This can be
charged using the supplied mains adapter.
Caution!
To prevent malfunctions, first
insert the battery into the parent unit and
then connect the mains adapter to the
parent unit.
1. Remove the battery cover
on the back
of the parent unit
, by sliding it
downwards.
2. Put the battery in its compartment as
indicated on the unit. Make sure you
insert it with the correct polarity (+ and -).
3. Slide the battery cover
.
4. Insert the small plug of the mains adapter
into the mains adapter socket
of the
parent unit.
5. Insert the plug into a power socket that
matches the rating given in the technical
data (see "9.
6. Initially, charge the parent unit
continuously
for 10 hours
to activate the
full battery capacity (see "4.4
4.2 Connecting the baby unit
Note:
Don’t install the baby unit
until the
battery of the parent unit
somewhere in the
nursery where your baby will not be able
to reach it.
An optimal distance between baby and
the baby unit is from 1 to 2 m.
Note:
Since the temperature sensor is
inside the baby unit it is important that
you do not cover it or place it near any
heat source. Direct sunlight may also
affect the reading.
2. Insert the mains adapter plug into the
socket
of the baby unit
3. Insert the plug into a power socket that
matches the rating given in the technical
data (see "9.
4.3 Connecting baby unit and
parent unit
1. Use the On/Off button
to switch the
baby unit
on. Keep the button pressed
for a moment until the Power LED
lights up.
to switch the
parent unit
on. Keep the button
pressed for a moment until the LED
lights up green.
The connection will be set up
automatically. While this is being done
the connection indicator
will light up
red.
Display
Shows the selected volume level. The
more bars you can see the higher the
selected volume
Loudspeaker symbol with no bars: The
device is muted.
Parent unit
Light
Display
Meaning
